Pomona
(R)
Model 1693 Spade Lug Patch Cord For Low Voltage Measurements
FEATURES: * The Model 1693 is part of a family of test accessories ideal for low voltage precision measurements. * Spade lugs of high conductivity gold plated ETP copper alloy 110, are attached to low resistance multi-stranded 12 gauge wire. * This design greatly minimizes the effect of Thermal Electric Voltage (Thermal EMF). Therma1 EMF is generated at the junction of dissimilar metals at different temperatures and is a common source of error in low micro and nano volt measurements. MATERIALS: Spade Lugs: ETP (Electrolytic Tough Pitch) 110 Copper Alloy, 1/2 Hard, Gold Plated Insulation: Polypropylene, molded to spade lug body and wire. Color matches wire. Marking: POMONA ELECTRONICS CALIF. Wire: 12 AWG; Stranding 7 x 38/36 Bare Copper, PVC Insulated, .144" (3,66 mm) O.D. Marking: Model 1693-* RATINGS: Operating Voltage: 2000 VRMS/DC Operating Temperature: +55 C. (+131F) Max. Current: 20 Amperes Continuous ORDERING INFORMATION: Model 1693-XX-* XX = Length in inches, * = Color Standard lengths: 36" (91,44cm) & 60" (152,40cm). Made To Order lengths can be quoted upon request. Standard Colors: -0 Black, -2 Red
All dimensions are in inches. Tolerances (except noted): .xx = .02" (,51 mm), .xxx = .005" (,127 mm). All specifications are to the latest revisions. Specifications are subject to change without notice. Registered trademarks are the property of their respective companies. Made in USA
6/9/99 SY/EH/LS
Sales: 800-490-2361 Fax: 888-403-3360 Technical Assistance: 800-241-2060
PomonaACCESS 90272 (800) 444-6785 or (425) 446-6010 More drawings available at www.pomonaelectronics.com
Page 1 of 1
S:\Engineering \Release\DataSheets\FlukeDataSheet\d1693_1_01.doc
|
